Views: 0 Author: Site Editor Publish Time: 2026-11-16 Origin: Site
Nanocellulose ( Nanocellulose ) is a fiber or whisker-like material obtained from natural cellulose with at least one dimension at the nanoscale. Its raw materials can come from agricultural and forestry biomass such as wood, bamboo, hemp, straw, sugarcane bagasse, etc., or can also be synthesized by microbial fermentation. While retaining the basic properties of cellulose such as renewable, biodegradable, and biocompatible, nanocellulose exhibits a larger specific surface area, higher aspect ratio, and enhancement potential due to nanoscale effects. In recent years, as bio-based materials and green manufacturing have attracted industry attention, the research and application of nanocellulose in papermaking, coatings and composite materials, emulsion stabilization, packaging films, etc. have gradually begun.
Cellulose is a linear polymer formed by glucose units connected through β-1,4 glycosidic bonds. It is the main component of plant cell walls. Plant fibers or other cellulose raw materials are dissociated to the nanometer scale through mechanical, chemical, enzymatic or combined processes, and the resulting fibers, filaments or whiskers are collectively referred to as nanocellulose. Compared with conventional micron-sized cellulose fibers, nanocellulose has a smaller size, larger specific surface area, and stronger interfacial interaction. Therefore, it exhibits different material behaviors in terms of reinforcement, rheology control, and interface stability.
According to the size, morphology, crystallization state and preparation source, common nanocellulose can be divided into three categories: cellulose nanofibrils, cellulose nanocrystals and bacterial cellulose.
CNF is mostly made from wood and other agricultural and forestry biomass, and is obtained through mechanical dissociation or supplemented by pretreatment. The fiber diameter is usually several nanometers to tens of nanometers, and the length can reach several micrometers. The fiber segments contain both crystalline and amorphous regions. They are flexible and easy to interweave in the water phase or matrix to form a network. They are suitable for reinforcement, suspension rheology control, thin films, composite materials and other scenarios.
CNC is usually produced by selectively removing amorphous areas and retaining crystalline areas in cellulose through acid hydrolysis and other methods. The morphology is mostly rod-shaped or needle-shaped, with high crystallinity and strong rigidity. Its raw materials can be wood, cotton, microcrystalline cellulose, etc. Due to differences in crystal structure and surface charge, CNC behaves differently from CNF in terms of dispersion behavior, interfacial adsorption, and composite enhancement .
Bacterial cellulose is synthesized by fermentation of microorganisms (such as Acetobacter, etc.) and does not contain complex components such as lignin and hemicellulose in plant cell walls. Therefore, it has higher purity, fine fibers, fine network structure, and strong water-holding capacity. It is more common in the research of high-demand membrane materials, gels, dressings and related carrier systems.
type | common sources | Typical morphology and structure | Common process orientations |
Cellulose nanofibrils ( CNF/MFC ) | Agricultural and forestry biomass such as wood, bamboo, hemp, straw, bagasse, etc. | The diameter is several nanometers to tens of nanometers, and the length can be several micrometers; it contains crystalline and amorphous regions, has good flexibility and is easy to form a network. | Mainly mechanical dissociation, which can be supplemented by chemical or enzymatic pretreatment |
Cellulose Nanocrystal ( CNC/NCC ) | Wood, cotton, microcrystalline cellulose, etc. | Rod-shaped or needle-shaped; the amorphous area is removed, the crystallinity is higher, and the rigidity is stronger | Chemical treatments such as acid hydrolysis preserve crystalline regions |
Bacterial cellulose ( BC ) | microbial fermentation synthesis | The fiber is fine, high in purity, fine in network, and has strong water-holding capacity. | Microbial culture and isolation and purification |
Note: The table is a summary of common features; the specific size, crystallinity and surface properties vary with different raw materials and processes.
The mechanical method peels off the raw fibers into nanofibrils through the shear and impact effects generated by equipment such as refining, high-pressure homogenization, and micro-jet. This route process is relatively straightforward and has low chemical load; however, the degree of fiber dissociation, energy consumption and product morphology are greatly affected by the type of raw materials and pretreatment conditions.
Chemical treatment, represented by the TEMPO oxidation system, selectively oxidizes the primary hydroxyl group at the C6 position of cellulose to carboxyl groups under alkaline conditions , introducing negative charges and electrostatic repulsion between filaments, so that the fibers can be separated under mild mechanical treatment. The carboxyl groups formed on the surface also provide reaction sites for subsequent modifications such as esterification and grafting.
Acid hydrolysis is a traditional and common route for preparing CNC : inorganic acids such as sulfuric acid, hydrochloric acid, and phosphoric acid selectively hydrolyze the amorphous region of cellulose and keep the crystalline region as intact as possible. The reaction requires control of acid concentration, temperature and time, and involves engineering issues such as acid recovery and wastewater treatment.
Cellulase, etc. can be used for auxiliary pretreatment to reduce subsequent mechanical energy consumption and regulate fiber morphology. In actual research and production, the combined process of chemical or enzymatic pretreatment and mechanical treatment is more common, aiming to achieve a balance between energy consumption, yield, fiber morphology and dispersion.
It should be noted that the process selection depends on the type of raw material, target product form and application requirements; nanocellulose obtained by different routes has obvious differences in size distribution, crystallinity, surface charge and dispersion stability, and should not be simply substituted for each other.
· High strength and high modulus: The mechanical properties originate from the cellulose crystalline region and intermolecular hydrogen bonding network. The strength and modulus values reported in the literature vary greatly due to different raw materials, testing methods and material forms (single fiber, film, suspension or composite materials); specific indicators should be based on the actual measurement results of the target sample.
· Low density and high specific surface area: Compared with most inorganic fillers, the density is lower; the nanoscale brings a larger specific surface area, which can reach hundreds of square meters per gram (depending on the type and process), which is beneficial to interface bonding, adsorption and loading of functional components.
· High aspect ratio and network formation ability: Fibers with large aspect ratios such as CNF can easily form continuous networks in the water phase or matrix, giving the system thickening, thixotropy, reinforcement and retention assistance.
· Surface hydroxyl groups and modifiability: The fiber surface is rich in hydroxyl groups, and the hydrophobicity and interface compatibility can be adjusted through esterification, etherification, graft copolymerization, surface adsorption, etc. to adapt to different matrices and formulation systems.
· Renewable and biodegradable: The raw materials come from biomass and are biodegradable under suitable environmental conditions; compared with petrochemical-based materials, their life cycle environmental impact is an important direction for industry discussion. Actual degradation performance is affected by material form, thickness and environmental conditions.
· Dispersion and rheological properties: Nanocellulose can exhibit thickening, thixotropic and particle stabilizing effects in aqueous suspension systems; the dispersion state is affected by conditions such as pH , ionic strength, surface charge and formula compatibility.
The above are the common characteristics at the material level. Specific indicators such as strength, modulus, specific surface area, and barrier properties need to be measured in combination with raw materials, processes, and application scenarios. It is not appropriate to use general literature ranges to replace the test results of specific products.
In pulp or paperboard systems, nanofibrils can be combined with the fiber network through hydrogen bonds to improve tensile strength, folding endurance, stiffness, and possibly increase the retention of fine fibers and fillers. The actual gain varies with the addition amount, pulp type, forming and drying process.
Nanocellulose can be used as a bio-based reinforcing phase to be compounded with resin, rubber and other matrices, using interface bonding to improve mechanical performance. To address the compatibility issues with hydrophobic matrices, surface modification can be used to improve interfacial bonding. In coating systems, it may also affect rheological behavior, film formation and reinforcement.
Nanofibers or nanocrystals can adsorb at the oil - water interface and form an interface barrier, reducing droplet aggregation and stabilizing the emulsification of solid particles. This direction is active in research in the fields of food, daily chemicals and pesticide delivery; emulsion stability is affected by particle size, surface properties, oil-water ratio and formulation conditions.
In daily chemical formula systems represented by surfactants such as Its suspension stabilization effect is related to formula compatibility, ionic strength, 、AES CAB , the dispersion state, suspension ability and rheological performance of nanofibers are important contents of application research. pH and other conditions, and needs to be verified through formula experiments and stability tests.
Nanocellulose can be used in the research of composite packaging films, coated papers, aerogels and other materials to explore their mechanical, barrier and degradable properties. Applications involving food contact must comply with the regulations, standards and safety requirements of the corresponding countries and regions.
Nanocellulose has also been researched and explored in the fields of building material reinforcement, water treatment membranes, adsorbent materials, medical dressings, carriers and sustained-release systems. Before entering the specific industry market, you need to meet the standards, certification and compliance requirements of the corresponding field.
· Bio-based and low-carbon substitution: In the context of dual-carbon goals and restrictions on disposable plastic products, replacing some petrochemical-based fillers and products with biomass materials is the long-term direction of policy and industry discussions.
· High-value utilization of biomass: Converting low-value-added raw materials such as straw, bran and other agricultural and forestry residues into high-value-added nanomaterials can help improve resource utilization efficiency; raw material diversification, pretreatment costs and product consistency are still the focus of industrialization.
· Continuous optimization of processes and modifications: reducing preparation energy consumption, improving dispersion and interface compatibility, and developing functionalized surfaces are the keys to promoting application; characterization standardization and long-term performance evaluation will also be gradually improved with industry development.
· Applications move toward scenario-based verification: Research hotspots are gradually shifting from material preparation itself to formula development and engineering verification for specific scenarios such as packaging, coatings, papermaking, and daily chemicals.
Nanocellulose has shown application potential in many fields due to its renewable, degradable, high specific surface area and reinforcing characteristics; its actual performance depends on the material type, preparation process, surface state and formulation system. Nanjing Tianlu Nanotechnology focuses on the application research and technical exchanges of nanocellulose in papermaking, coatings and polymer composites, Pickering emulsification and fiber suspension systems; specific material properties and application plans are subject to actual sample measurement and scenario application verification.